TRUSTED BY...
On the job, SLURRYTUB is a straightforward piece of kit.
It uses a single-use biodegradable filter that is placed into the tub and secured down by attaching the 4 holes into the cleats.
Slurry waste is then poured into the tub, hand tools and equipment can be washed down with the runoff flowing into the tub. The filtered water is then drained safely in washout areas or recycle on the job.Most of the water should drain within 30-60 minutes depending on the slurry contents. When dry enough, dispose of the hardened waste, along with the biodegradable filter into the work site skip at the end of the day. Way too easy!
On the job, SLURRYTUB is a straightforward piece of kit. It uses a single-use biodegradable filter that is placed into the tub and secured down by attaching the 4 holes into the cleats. Slurry waste is then poured into the tub, hand tools and equipment can be washed down with the runoff flowing into the tub. The filtered water is then drained safely in washout areas or recycle on the job.Most of the water should drain within 30-60 minutes depending on the slurry contents. When dry enough, dispose of the hardened waste, along with the biodegradable filter into the work site skip at the end of the day. Way too easy!
Our ‘best practice’ solution was created to significantly improve the environmental performance of building sites, save time on daily clean-ups, avoid significant penalties/fines, improve company reputations, and importantly keep clients happy.
On the job, SLURRYTUB is a straightforward piece of kit. It uses a single-use biodegradable filter that is placed into the tub and secured down by attaching the 4 holes into the cleats. Slurry waste is then poured into the tub, hand tools and equipment can be washed down with the runoff flowing into the tub. The filtered water is then drained safely in washout areas or recycle on the job.Most of the water should drain within 30-60 minutes depending on the slurry contents. When dry enough, dispose of the hardened waste, along with the biodegradable filter into the work site skip at the end of the day. Way too easy!
Our ‘best practice’ solution was created to significantly improve the environmental performance of building sites, save time on daily clean-ups, avoid significant penalties/fines, improve company reputations, and importantly keep clients happy.
"Anywhere where you've got a tight site, tight access, and nowhere to clean up, it's the perfect product."
- Brick Block Stone
"It's environmentally friendly and prevents any runoff going down into the drains or if your working by the street, going into the gutters."
- Whittaker Landscapes
"I'd recommend the product to any other landscapers, DIY dads or just anyone that want to keep a job site clean and just do something good for the environment."
- Mother Natures Landscapes
We may have already answered your question, if not please feel free to contact us we are here to help.
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material.
We know that this will be enough for your standard wheelbarrow washout.
However, if greater capacity is needed on your jobsite, we suggest having another tub ready to go! Our twin kit is perfect for higher volume requirements!
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material.
We know that this will be enough for your standard wheelbarrow washout.
However, if greater capacity is needed on your jobsite, we suggest having another tub ready to go! Our twin kit is perfect for higher volume requirements!
The cut-out at the front of your SLURRYTUB has been specifically tested & designed to support the most commonly available wheelbarrows.
Your wheelbarrow should rest ‘hands-free’ in the SLURRYTUB front cut-out. You should have no problem washing out your barrow with ease.
Typical drying time will be around 30 mins to 60 mins. However, this will vary depending on the contents of the washout material.
Once the waste has hardened, simply empty the contents and the biodegradable filter into the site skip bin or take the contents off-site and dispose of them safely in accordance with environmental guidelines.
You should always allow filtered water from the SLURRYUTB drain into a protected wash up area or be captured and then recycled on the job.
This a great way to increase water savings on your jobsite.
Yes! The low-micron-rated paper filter used in SLURRYTUB can be used for these types of wash ups.
However, we don’t recommend it for use with paint, adhesives or waterproof membrane.
Carefully remove the filter from the ZIPLOCK bag and open out the filter, keeping the flap with the logo at the front of the tub.
Once the filter is placed into the tub, carefully attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB.
Make sure the filter flap is at the front and sits over the lower cut out area on tub.
We may have already answered you question, if not please feel free to contact us we are here to help.
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material.
We know that this will be enough for your standard wheelbarrow washout.
However, if greater capacity is needed on your jobsite, we suggest having another tub ready to go! Our twin kit is perfect for higher volume requirements!
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material.
We know that this will be enough for your standard wheelbarrow washout.
However, if greater capacity is needed on your jobsite, we suggest having another tub ready to go! Our twin kit is perfect for higher volume requirements!
The cut-out at the front of your SLURRYTUB has been specifically tested & designed to support the most commonly available wheelbarrows.
Your wheelbarrow should rest ‘hands-free’ in the SLURRYTUB front cut-out. You should have no problem washing out your barrow with ease.
Typical drying time will be around 30 mins to 60 mins. However, this will vary depending on the contents of the washout material.
Once the waste has hardened, simply empty the contents and the biodegradable filter into the site skip bin or take the contents off-site and dispose of them safely in accordance with environmental guidelines.
You should always allow filtered water from the SLURRYUTB drain into a protected wash up area or be captured and then recycled on the job.
This a great way to increase water savings on your jobsite.
Yes! The low-micron-rated paper filter used in SLURRYTUB can be used for these types of wash ups.
However, we don’t recommend it for use with paint, adhesives or waterproof membrane.
Carefully remove the filter from the ZIPLOCK bag and open out the filter, keeping the flap with the logo at the front of the tub.
Once the filter is placed into the tub, carefully attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB.
Make sure the filter flap is at the front and sits over the lower cut out area on tub.
We may have already answered you question, if not please feel free to contact us we are here to help.
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material.
We know that this will be enough for your standard wheelbarrow washout.
However, if greater capacity is needed on your jobsite, we suggest having another tub ready to go! Our twin kit is perfect for higher volume requirements!
The SLURRYTUB can hold up to 35 - 40L of wet trade waste material.
We know that this will be enough for your standard wheelbarrow washout.
However, if greater capacity is needed on your jobsite, we suggest having another tub ready to go! Our twin kit is perfect for higher volume requirements!
The cut-out at the front of your SLURRYTUB has been specifically tested & designed to support the most commonly available wheelbarrows.
Your wheelbarrow should rest ‘hands-free’ in the SLURRYTUB front cut-out. You should have no problem washing out your barrow with ease.
Typical drying time will be around 30 mins to 60 mins.
However, this will vary depending on the contents of the washout material.
Once the waste has hardened, simply empty the contents and the biodegradable filter into the site skip bin or take the contents off-site and dispose of them safely in accordance with environmental guidelines.
You should always allow filtered water from the SLURRYUTB drain into a protected wash up area or be captured and then recycled on the job.
This a great way to increase water savings on your jobsite.
Yes! The low-micron-rated paper filter used in SLURRYTUB can be used for these types of wash ups.
However, we don’t recommend it for use with paint, adhesives or waterproof membrane.
Carefully remove the filter from the ZIPLOCK bag and open out the filter, keeping the flap with the logo at the front of the tub.
Once the filter is placed into the tub, carefully attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB.
Make sure the filter flap is at the front and sits over the lower cut out area on tub.
