SLURRYTUB Trade Twin Filter Pack (48)
Includes:
- 2x Filter Pack - TRADE for SLURRYTUB - 24 ‘Slab’ Pack
Features
- 2x Bulk TRADE ‘Slab’ Pack of 24 Filters
- Low Micron Industrial Grade Filter Paper
- Fully Disposable, Biodegradable paper material
- Designed only for SLURRYTUB use
Please Note:
- Not recommended for some tile adhesives/glues and floor levelling compounds - BEST for cement/concrete, mortar mix and tile grout washout
TRUSTED BY THE BEST...
SLURRYTUB IS THE ONLY SOLUTION!
10,000,000+
Litres of Water Saved Already
10,000+
SLURRYTUB's on Site Worldwide
100+
Hardware Stores Worldwide
HOW DOES IT WORK?
1. Place Filter In Tub
Begin by placing the biodegradable cellulose filter inside the SLURRYTUB. Ensure the flap with the logo is positioned over the cut-out area at the front of the tub. This cut-out allows easy access for wheelbarrows. Secure the filter by placing the reinforced holes in the filter over the cleats located in each corner of the tub. These cleats hold the filter securely in place, preventing it from shifting during the washout process. The filter is designed to capture all slurry sediment, ensuring only clean water passes through.
HOW DOES IT WORK?
2. Wash Up Tools & Pour Slurry Into Tub
Once your tools, equipment, or machinery (such as wheelbarrows, mixers, or hand tools) have been used, it’s time for washup. Stand the wheelbarrow up and pour the slurry into the SLURRYTUB. The tub is designed to accommodate the lip of the wheelbarrow in the cut-out section, providing hands-free support for easy, mess-free pouring. As the slurry enters the tub, the filter begins separating out solid particles like cement, grout, and other sediments, while allowing the water to continue through for filtration.
HOW DOES IT WORK?
3. Allow Water To Filter In Washout Area
After pouring the slurry into the SLURRYTUB, the water will begin filtering through the biodegradable filter. Position the tub in a designated washout area for safe drainage, or direct the filtered water to a location where it can be recycled on-site. SLURRYTUB’s innovative filtration system ensures that the water passing through is visibly clear, free of suspended solids, and environmentally safe. The filtration process typically takes between 30 to 60 minutes depending on the contents of the slurry, allowing you to get back to work while it filters.
HOW DOES IT WORK?
4. Dispose of Hardened Waste
Once the water has drained, the remaining solid waste, now hardened, will be captured by the filter. Simply remove the filter and its contents from the SLURRYTUB and dispose of them in the appropriate waste disposal method, such as a site skip. Because the filter is biodegradable, it can be disposed of responsibly along with the hardened waste. For best results, use only one filter per washout session to ensure maximum filtration efficiency and prevent overloading the system with too much slurry sediment.
More Features Than a Swiss Army Knife
Our ‘best practice’ solution was created to significantly improve the environmental performance of building sites, save time on daily clean-ups,
avoid significant penalties/fines, improve company reputations, and importantly keep clients happy.
Drain plugs in threaded holes
Structural base, designed to drain quickly
Single use biodegradable filter
Corner 'cleats' hold filter in place
Front 'cutout' supports wheelbarrows handsfree
DON'T JUST TAKE OUR WORD FOR IT!
SLURRYTUB is Being Used Daily by Bricklayers, Tilers, Landscapers, Builders and DIYers.
YOU ASKED WE ANSWERED
SLURRYTUB FAQ'S
You’ve got the questions, we’ve got the answers – no dramas! Whether you're dealing with a wheelbarrow washout or managing the mess on site, SLURRYTUB’s got your back. So, kick back, have a read, and we’ll help you keep your jobsite clean and easy. No fuss, just good gear.
The SLURRYTUB can hold up to 35-40L of wet trade waste material, plenty for your standard wheelbarrow washout. If you need more capacity on-site, no worries! Have another tub ready to go. Our twin kit is a perfect option for higher-volume requirements.
Typically, drying takes around 30 to 60 minutes, but this can vary depending on the washout material. Once the waste has hardened, simply empty the contents and biodegradable filter into the site skip bin, or safely dispose of them off-site in line with environmental guidelines.
You bet! The low-micron-rated paper filter used in SLURRYTUB is great for those wash-ups. However, we don’t recommend using it with paint, adhesives, or waterproof membranes.
Carefully remove the filter from the ZIPLOCK bag and unfold it, making sure the flap with the logo faces the front of the tub. Attach the filter holes to the ‘cleats’ on each corner of the SLURRYTUB, ensuring the flap sits over the lower cut-out area at the front of the tub.
YOU MAY ALSO LIKE
Check Out These Ripper Kits
